You can install an RV awning light kit to enhance your outdoor living area. The variety of lighting options available includes rope lights, bright lights, and light kits. Most of these types of lights offer consistent lighting, creating a comfortable atmosphere that you’ll want to spend more time in. Many of these types of lighting systems are waterproof and dust-resistant, and some of them even offer remote controls for convenience. You can purchase a variety of different types of lights that offer different colors, as well.
Turn Off The Power First Before Cutting
You’ll find LED strip lights available that are easy to install. These lights are affixed to the side of your RV. They fit into the compression channel on your awning and hook up to an existing power source. Typically, white units feature a white PCB, while black and tan units feature black PCBs. When installing your RV awning light kit, be sure to follow the instructions carefully. A few minutes of practice can make the process a snap!
Before you install an LED strip light on your RV awning, you need to clean the surface with alcohol or a household cleaner. Dirt and debris can prevent the lights from sticking to the awning and may even reduce their lifespan. Make sure to cut your strip lights to fit the size of your awning. When installing LED strips, remember to turn off the power first before cutting. This will prevent a potential electrical shock or injury.
When your garage door spring breaks, you’re likely going to need to replace it, but where do you start? Here are a few tips. First, you must know that most garage door springs fail in their down position, where the most tension is. If you notice that your garage door is failing in its up position, it may just be a rusted spring. This can be hazardous if you’re walking under it.
Luckily, the replacement isn’t that hard. Although it does require some time, you’ll also need a few safety tools and a helper. Depending on the size of your spring, you could be looking at a full weekend for the task. Fortunately, you can contact your local garage door supplier for help. Regardless of the size of your garage, a broken spring will likely take only a couple of hours to replace.
The most common cause of garage door spring failure is wear and tear. Garage doors are subjected to roughly 10,000 cycles per spring. This means that a spring will last about seven years if used at the same rate every day. You should also consider that garage door springs can break after a certain number of cycles. Sun Devil Garage Door is currently offering a spring repair special for $159. Whether you choose a spring with a long life or a short one, the costs of garage door spring replacement vary greatly.
While garage door springs are relatively inexpensive, you should be aware that the job can be dangerous. The amount of pressure on torsion springs is significant, and you could hurt yourself or even endanger yourself if you try to fix it yourself. A garage door spring replacement service could cost you between two and four hundred dollars, so you should be prepared for that. And remember to write down the specifications for the spring you need.
